QRP (FT8-WSPR) Monitoring Station with an RTL-SDR V3 and Raspberry Pi 2
Using a Raspberry Pi2 and following this guide, I finally managed to decode the FT8 and WSPR signals using only a RTLSDR V.3 with the virtual card and the WSJT-X sw (version that allows FT8 and WSPR reception on ARM processors). The first receptions, with uploads to PSKreporter.info, were also displayed on my Windows10 PC on sw "GridTracker". 😋 Beacon every 15 minutes on aprs.fi
Monitoring 15-20-40 meters (12 hours) 😋
Monitoring 10 meters (4 hours)
GridTracker report
WSPR 20 meters
Video
Comments